Carrier Pro II™
The Carrier Pro II™ is ImageStream's flagship carrier-class router. It is designed to meet the expectations of five nines (99.999%) uptime with a tightly coupled architecture that features redundant CPUs, buses, alarm systems, power supplies, and fans.
The Carrier Pro II provides standard features including redundant high-availability IBM PowerPC 750 processor cards, 256 MB ECC SDRAM, watchdog module, flash storage, dual 10/100 ethernet, hot-swap 350 W power supply modules, hot-swap cooling fan trays, serial console, rear panel I/O, and three expansion buses. The Carrier Pro II also offers a variety of options including redundant DC power supplies, removable flash card storage, high-speed packet processing engines, 23" telecom rackmount, and the entire line of Pro Series network cards.
The Carrier Pro II offers a 12-slot high-availability backplane with redundant CompactPCI buses. The split-backplane design allows for 2N, N+1, hot standby and full redundancy configuration. Each of the redundant expansion buses provides over 3 Gbps of bandwidth, with one 64-bit 33 Mhz CPCI bus, one 32-bit 33 MHz PMC bus, and one H.110 telephony bus. The Carrier Pro II includes 6U expansion slots and two 32-bit PMC sites. Each 6U slot can accomodate Pro Series network cards including 6U CPCI cards, PMC cards with PMC carriers, or PMC cards with packet processing engines.
Available software includes HA-aware device drivers (PICMG-compliant); alarm management; and shells for heartbeat, checkpoint, and policy management. Coupled with the Whitney watchdog module, the Carrier Pro II provides a best-two-out-of-three failover voting process, with switchovers accomplished in less than 50 milliseconds.
Hardware |
Processors: (2) hot-swap compliant IBM PowerPC 750
Memory: 256 MB ECC SDRAM per CPU card
Storage: (2) fixed flash disks
Network Ports: Dual 10/100 ethernet per CPU card
Management Port: Serial console
System Mgmt.: I2C controller interface
Failover Mgmt.: Dedicated Ethernet, 115Kbps Serial
Watchdog Module
Low-power 50 MHz 860 processor
Dual 115Kbps failover control ports
I2C controller interface
Power fail detection
MTBF exceeds 600,000 hours
Redundant Expansion Buses
(1) 64-bit 33 MHz CompactPCI bus
(1) 32-bit 33 MHz PMC bus
(1) H.110 telephony bus
Redundant Expansion Interfaces
(5) 6U 32/64-bit 33 MHz CPCI slots
(5) 6U rear transition slots
(2) 32-bit 33 MHz PMC sites
Wire-Speed Performance*
Up to one OC12
Up to two OC3s
Up to four DS3s or E3s
Up to 40 T1s or E1s
Cooling: (3) Hot-swap fan trays
AC Power
Supplies: Dual hot-swap PFC
Mains: 100 to 240 VAC
Output: 350 W x 2
Dimensions
Height: 17.5 inches (44.5 cm)
Width: 19 inches (48.3 cm)
Depth: 13.9 inches (35.3 cm)
Weight: 44 lbs. (20 kg)
Software
ImageStream Linux™
Integrated Linux kernel
Inetics™ platform
PPP, HDLC, frame relay & ATM
RIP1, RIP2, OSPF & BGP4
|
|
Menu-driven configuration
Real-time monitoring
SNMP monitoring
IP translation firewall
Bandwidth limiting
Packet filtering
Port forwarding
Quality of Service (QoS)
Interface bonder
Secure telnet
System scheduler
IPSec VPN
Options
Processors
Packet processing engines
PPMC co-processors
Storage
Removable Flash Disk
LAN Cards
1 port gigabit ethernet
1, 2, 4 and 8 port 10/100 ethernet
24 port ethernet switch
WAN Cards
1 port OC3
1 and 2 port T3/E3
1 and 2 port HSSI
1, 2, 4 and 8 port T1/E1
1, 2, 4 and 8 sync serial
Power Supplies
350 W DC Power Supplies
Model Numbers
CP1000-II - Base system
CP1000-II-DC - DC supplies
CP1023-II - 23" rackmount HA
Highlights
31-Day Performance Guarantee
1 Year Warranty on Parts & Labor
Free 24/7 Support for 1 Year
Free Software Upgrades for Life
|
* Please refer to the wire-speed performance note for more information on this specification.
|
|
|
|
|
Replacement Guide
|
Cisco 7000 series
Cisco 10000 series
Cisco 12000 series
Juniper M5/M10
|
|
Save on Certification
|
|
|
|
|
Meet Us at ISPCON
|
|
|
|
|
|
|
Lab Test
|
|
|
Lab Test
of the
Rebel
Router
|
|
|
|
Product Review
|
|
|
Reviews
the
TransPort
Router
|
|
|
|
|
