ImageStream Internet Solutions, Inc.

Enterprise Router^™

ImageStream's Enterprise Router™ is the flagship of the Industrial Series router line. The Enterprise includes premium features like dual XEON® processors, quad PCI-X 133 buses, redundant power supplies, and dual 10/100/1000 ethernet ports. The Enterprise can handle the most challenging TCP/IP routing applications as it delivers wire-speed performance with T1/E1, DS3/E3, OC3/STM1 and OC12/STM4 circuits.

The Enterprise includes a steel 5U 19-inch rackmount chassis, a high-performance dual processor industrial computer, quad bus backplane, 512 MB error-correcting DDR memory, and dual 10/100/1000 ethernet ports. The Enterprise is also designed for high reliability, and features a dual input redundant AC power supply, hot-swap chassis cooling fans, and flash storage with no moving parts.

The Enterprise is very scalable with its dual XEON® processors and 12 PCI-X slots. The four buses (A, B, C and D) are PCI-X 133 buses that operate independently at speeds up to 8 Gbps, providing an aggregate bus bandwidth of up to 32 Gbps. Bus A is shared by the on-board 10/100/1000 ports, and can operate at a maximum clock speed of 100 MHz when additional cards are installed on the bus.

The PCI slots accept LAN and WAN adapters including all Industrial Series network cards. With these add-on cards, the Enterprise can route between multiple IP networks using 56/64 K DDS, fractional and full T1/E1, fractional and full DS3/E3, OC3, OC12, OC48, token ring, ethernet, 802.11a/b/g wireless, ADSL, basic rate ISDN (BRI), and 56 K dial-up modem connections.

The Enterprise takes advantage of the ImageStream Linux™ router distribution, which provides support for NAT firewall security, IPsec and SSL virtual private networks (VPNs), quality of service (QoS), VLAN tagging, VRRP for LAN failover, dynamic routing, packet filtering, bridging, peer-to-peer traffic control, and more. ImageStream Linux also includes the Inetics platform, which provides a tightly integrated Linux kernel, management software, and the Inetics Driver Component Architecture (IDCA). IDCA supports WAN protocols including PPP, Cisco HDLC, frame relay, ATM, and SoftCell™ ATM. Inetics also makes it easy to troubleshoot LAN and WAN connections by providing real-time port status and performance monitoring.

The Enterprise is an ideal solution for applications that require wire-speed performance with superior scalability and built-in power supply redundancy. The router supports IP firewall security, IPsec virtual private networking (VPN), and a wide range of other powerful features. The Enterprise will work where most Cisco 7200, 7600 and 12000 series routers are used.

The Enterprise is commonly used by Internet Service Providers (ISPs) as a core router for multihomed networks where dynamic routing, multiport T1/E1, DS3/E3, OC3, OC12 and OC48 connections are deployed. The Enterprise is a low-cost, full-featured router for midrange ISP applications and corporate networks where scalability and redundancy are required.

Hardware Chassis: Steel 5U 19" rackmount Processors: Dual Intel XEON Memory: 512 MB ECC SDRAM Storage: Fixed flash disk Network Ports: Dual 10/100/1000 UTP Management Port: Serial console Expansion Interfaces Bus A: 2 PCI-X 100 MHz 3.3 V slots Bus B: 3 PCI-X 133 MHz 3.3 V slots Bus C: 3 PCI-X 133 MHz 3.3 V slots Bus D: 4 PCI-X 133 MHz 5 V slots Wire-Speed Performance* Up to one OC48 Up to two OC12s Up to three OC3s Up to six DS3s or E3s Up to 96 T1s or E1s Power Supply Design: Redundant dual input AC AC Mains Voltage: 100 to 240 VAC AC Mains Frequency: 50/60 Hz Power Output: 350 W Dimensions Height: 8.75 inches (22.2 cm) Width: 19 inches (48.3 cm) Depth: 19.5 inches (49.5 cm) Weight: 43.8 lbs. (19.9 kg) Shipping Weight: 51.6 lbs. (23.5 kg) Environmental Requirements Operating temperature: 5 to 60 °C Humidity: 5% to 90% (non-condensing) Storage temperature: 0 to 70 °C Options LAN Cards 1 port gigabit ethernet 1 and 4 port 10/100 ethernet WAN Cards 1 port OC48 1 port OC12 1 port OC3 1 and 2 port DS3/E3 1 and 2 port HSSI 1, 2, 4 and 8 port T1/E1 1, 2, 4 and 8 port sync serial 1 port 802.11a/b/g wireless 1 port ADSL 1 port basic rate ISDN (BRI) 1 port 56 K modem Model Number** ER1000 - Base system		Software ImageStream Linux™ High-performance Linux kernel Scalable Inetics™ platform Menu-driven configuration CALEA intercept support On-line & off-line upgrades Local and remote logging Real-time monitoring Quality of Service (QoS) Bandwidth limiting Packet filtering Peer-to-peer traffic control Port forwarding System scheduler PPP, Cisco HDLC and frame relay CEF-compatible bonder MLPPP and MLFR SoftCell™ ATM and IMA PPPoE and PPPoA RIP, OSPF & BGP SNMP or NetFlow® accounting NAT firewall (1:1 & 1:many) NTP clock synchronization T1/E1 drop & insert Concurrent bridging & routing Secure telnet (ssh) v.2 L2TP, GRE, IPIP & CIPE tunneling Remote RADIUS TACACS+ DHCP client & server VLAN tagging IPSec & SSL VPN VRRP IPv6 Highlights 31-Day Performance Guarantee 1 Year Warranty on Parts & Labor Free 24/7 Support for 1 Year Free Software Upgrades for Life
Note: Terms and specifications are subject to change without notice.
* Please refer to the wire-speed performance note for more information on this specification.
** Aggregate full-duplex OC48 speeds are limited to 4 Gbps by the OC48 adapter's 64-bit 66 MHz PCI bus interface.