PCI 1100 SeriesThe PCI 1100 WAN adapter is designed for use in ImageStream's Industrial Series routers or in OEM products running Linux. The PCI
1100 provides four OC3/STM1 SONET/SDH ports for packet-over-SONET/SDH (POS) applications. It also includes a high-performance embedded network processing unit (NPU) that accelerates packet processing for high-speed routing or monitoring applications. |
 |
The PCI 1100 provides a 32-bit 33/66 MHz PCI bus interface that supports signaling at 3.3 or 5 volts. This high-speed PCI bus interface supports up to 2 Gbps throughput, and allows the card to operate at the higher bus speeds supported by ImageStream's Gateway Express and Enterprise Express.
The PCI 1100 takes advantage of the Wintegra WinPath 777 NPU. The 777 includes an integrated MIPs processor for board control and protocol processing, as well as a packet processing pipeline with four 200 MHz processing cores. The NPU is fully programmable, and can take advantage of new protocols and software features as they are developed.
Another important feature of the PCI 1100 is its modular fiber optic transceivers. The PCI
1100 uses SFP pluggable transceivers so each port can be configured to support any of the available fiber optic interfaces. Pluggable SFP transceivers include multi-mode fiber for short haul applications, intermediate reach single mode fiber for distances up to 15 km, and long reach single mode fiber for distances up to 25 km.
Performance:
-
32-bit 33/66 MHz PCI
-
Low-latency PCI bus master
-
4 full duplex 155 Mbps ports
-
SONET OC3 or SDH STM1
Technical Highlights:
-
PCI 2.2 compliant
-
WinPath 777 NPU
-
Four-stage packet processor
-
128 MB packet RAM
-
8 KHz Tx/Rx reference clock
OC3 Interface Features:
-
Selectable SONET STS-3c or SDH STM-1
-
LC duplex fiber
-
Compliant with GR-253 and GR-499
|
 |
SFP Interface Options:
-
Multimode fiber up to 2 km
-
Single mode fiber up to 15 km
-
Single mode fiber up to 25 km
Standards Compliance:
-
PCI 2.2
-
RFC 1619, 1661, 1662 & 2615
-
ITU-T G.707 & 783
-
Telcordia GR-253 & GR-1244
Model Numbers for Card and SFP Options:
-
PCI 1100 - 4-port POS OC3/STM1 card
-
SFP-OC3-MM - Multimode transceiver for distances up to 2 km
-
SFP-OC3-SM-IR - Single mode transceiver for distances up to 15 km
-
SFP-OC3-SM-LR-25 - Single mode transceiver for distances up to 25 km
-
SFP-OC3-SM-LR-40 - Single mode transceiver for distances up to 40 km
Note: One SFP transceiver is required to connect each OC3/STM1 port.
|
|