PCI 520 Series

ImageStream's PCI 520 series network cards are low-cost PCI 2.1 compliant adapters that support multiport synchronous serial connectivity for WAN and Internet routing applications. The 520 series can be used with Industrial Series routers or OEM products running Linux, FreeBSD, Solaris, VxWorks or Windows.

The 520 series cards provide physical interfaces that can be independently configured via software, and cabling to support the V.35, RS232, and RS422 communications standards. The RS422 interface supports standard EIA530, X.21, and RS449 physical interfaces using the appropriate cables.

The 520 series uses the DSCC4 H-10 chipset that supports up to four full duplex ports at speeds up to 10 Mbps per port for an aggregate maximum throughput of 40 Mbps full duplex. The 520 series hardware supports async, bisync, and SDLC/HDLC protocols with a low-latency PCI interface that can burst into host memory at 132 MBps.

PCI 520 Series

Performance:

32-bit 33 MHz PCI bus master
Low-latency PCI interface
Up to 40 Mbps aggregate throughput

Technical Highlights:

Up to 4 full duplex sync ports
PCI 2.1 compliant
Short PCI form factor
MTBF greater than or equal to 100,000 hours

Interface Options:

Single or dual multi-interface V.35, RS232, RS422 (EIA530, X.21 or RS449) ports

Model Numbers and Interface Configurations:

PCI 521-SE - 1 multi-interface V.35/RS232/RS422 (EIA530, X.21, RS449) port
PCI 522-SE - 2 multi-interface V.35/RS232/RS422 (EIA530, X.21, RS449) port
400070 - V.35 cable
400005 - RS232 and RS422/EIA 530 cable
400060-RTS-CTS - X.21 cable
400020 - RS449 cable

Environmental Requirements:

Operating temperature 0 to 55 degrees C (32 to 131 degrees F)
Relative humidity to 90% (non-condensing)

Power Requirements:

1.8 amps @ 5 volts (max)
0.2 amps @ 12 volts (max)
0.1 amps @ -12 volts (max)

Certification:

CE Mark
FCC Part 15 (Class B)
FCC Part 68