TransPort

The TransPort is ImageStream's low-cost high-performance premise router that supports up to four T1/E1 ports. The TransPort provides advanced business-class features including NAT firewall, QoS, VPN, dynamic routing, line bonding, peer-to-peer traffic control, VoIP gateway, and more. The TransPort's extensive feature set makes it an ideal router for networking applications that require an affordable router with advanced features and wire-speed performance.

The TransPort includes a cool running VIA C7 processor, 256 MB memory, four 10/100 ethernet ports, and an expansion slot for a variety of network adapters. The TransPort can be bundled with single, dual or quad port adapters for synchronous serial or T1/E1 applications, and it supports optional interfaces for ethernet, FXO/FXS, basic rate ISDN (BRI), and 56 K dial-up.

ImageStream Linux also includes the Inetics platform, which provides a tightly integrated Linux kernel, management software, and the Inetics Driver Component Architecture (IDCA). IDCA supports WAN protocols including PPP, Cisco HDLC, frame relay, ATM, and SoftCell® ATM. Inetics also makes it easy to troubleshoot LAN and WAN connections by providing real-time port status and performance monitoring.

   


TransPort Router

Downloads
Data Sheet

Replacement Guide
Cisco 1800 series
Cisco 2800 series

The TransPort uses the Inetics platform, which includes modular driver support for WAN protocols including PPP, Cisco HDLC, frame relay, and ATM. Inetics technology also supports realtime port status and performance monitoring, which simplifies troubleshooting for network connections. The TransPort is designed for use in branch offices and other small-scale premise routing applications. It offers wire-speed performance and unwavering reliability in a small but durable steel chassis. The TransPort can replace Cisco 1800 and 2800 series routers, and it provides a low-cost solution for virtual private network (VPN) and quality of service (QoS) applications where wirespeed performance is required.

 

Hardware

Chassis: Steel set-top
Processor: 1GHz VIA C7
Memory: 256 MB SDRAM
Storage: Fixed flash disk
Network Ports: Four 10/100 ethernet
Management Port: Serial console
Expansion Interface
  (1) 32-bit 33 MHz PCI Slot
Power Supply
  Design: External AC-DC adapter
  AC Mains: 100-240 VAC, 50/60 Hz
  DC Output: 15VDC at 4 amps
  Power Output: 60 W
Dimensions
  Height: 2 inches (5 cm)
  Width: 8.9 inches (23 cm)
  Depth: 8 inches (20.5 cm)
  Weight: 2.6 lbs. (1.2 kg)
Memory Options
  512MB, 1GB or 2GB

Options

LAN Cards
 
1, 2 & 4 port gigabit ethernet
WAN Cards
 
1, 2 & 4 port sync serial or T1/E1
  1 port basic rate ISDN (BRI)
  1 port 56 K modem
Voice Cards
 
1 to 4 port FXO/FXS
  1, 2 & 4 port ISDN BRI
  1, 2 & 4 port T1/E1 PRI

Model Numbers
 
TR1000 - Base chassis
  TR1000-SE - 1 port sync serial bundle
  TR1000-2SE - 2 port sync serial bundle
  TR1000-TE - 1 port T1/E1 bundle
  TR1000-2TE - 2 port T1/E1 bundle
 

* Please refer to the  wire-speed performance note for more information on this specification.
Note: Terms and specifications are subject to change without notice.
 

 Copyright © 2008 ImageStream Internet Solutions, Inc. All rights reserved. Legal Notices | Privacy Policy